October 10, 2024 4 min read
Ceramic water filters are one of the earliest water filtration technologies available. Henry Doulton, an inventor and potter, discovered in 1827 that filtering water using porous ceramic media removed waterborne diseases like cholera from drinking water. Doulton produced a royal gravity-fed water filter for Queen Victoria, combining the grandeur of hand-crafted ceramics with his groundbreaking water filtration technology. Since then, ceramic water filters have been a mainstay of the market.
Water filtered using a Ceramic Dome Filter is safe to drink. Compared to boiling, this form of purification is healthier since dust and particles, as well as hazardous organic components and chlorine, are removed.
Purified drinking water using a Ceramic Dome Filter is quite convenient. Before needing to be replaced, a Ceramic Dome Filter may cleanse up to 5,000 liters of water.
The Ceramic Dome Water Filter removes dangerous organic compounds and bacteria while increasing important alkaline minerals and oxygen in the water, giving it a fresh, sweet taste.
You no longer need to go out and get water. There’s no need to boil the water. The Ceramic Dome Water Filter is simple to use and enhances one’s quality of life.
It makes no difference in the kind of ceramic cartridges: long, shorter candles for gravity bench filters or regular drop-in cartridges.
So it doesn’t matter what brand you use: Doulton, Ultrapure, or anything. All of the cartridges are made of ceramic. These cartridges are fantastic.
There are also multistage ceramic filters. The water enters through a layer of activated carbon followed by the ion exchange resin, which filters particulate debris and repels bacterial development. For a complete cleansing procedure, ceramic filters frequently combine all of these ingredients.
A ceramic filtration system filters bacteria and silt from drinking water using small holes on a ceramic surface. It is a cost-effective and adaptable water filtration system placed in homes or carried around as a portable filtration device.
A natural ceramic media serves as the heart of a ceramic filtration system’s water filtering process. The ceramic filter cartridge, also known as a ceramic filter candle, processes water and eliminates pollutants through a network of pores. Some use ceramic filtering systems in a wide range of situations. They can be gravity-fed, under-sink, countertop, or even used for an entire house or light industrial activities in some cases.
A ceramic filtration system is also one of the most cost-effective filtration alternatives. A complete point-of-use ceramic (POU) system usually costs between $100 and $200. It’s a lot more environmentally responsible alternative to bottled water. It’s also significantly less expensive than many other filtering systems. The ceramic filters themselves can be cleaned and reused, lowering the number of replacement filters required. The gravity-fed variants are lightweight and run without power.
The porous surface of the ceramic filter effectively filters out particulate matter such as dirt, debris, and rust.
Ceramic filters are effective at removing bacteria such as Shigella, E. coli, and salmonella by blocking them as water seeps through the pores. They also eliminate microbial cysts like Giardia and Cryptosporidium.
Ceramic filters remove suspended particles, ensuring that water is crystal clear.
The activated carbon in the water decreases chlorine and chloramines, giving water a fresher taste.
Ceramic filters with carbon cores significantly lower VOC levels from agricultural runoff and consumer products like paints and insecticides.
Ceramic filters with ion exchange resin significantly reduce heavy metals like copper, lead, mercury, and zinc in the water.
Ceramic filters do not remove minerals like calcium and magnesium. They also won’t help with water hardness; for that, you need a water softener.
Ceramic filters don’t reduce total dissolved solids. For that, you’ll need a reverse osmosis system.
Ceramic filters are not effective at removing viruses. For that, consider a UV water purifier.
Clean your ceramic filter when you notice a buildup of sediment on its exterior or when the water flow becomes slow.
Follow these cleaning steps:
Always use a fresh, clean scourer pad to avoid clogging the filter with dirt, fat, or oils.
Be careful not to drop the cartridge, as it might crack.
Remove the cartridge, then scrub it gently with a clean scourer pad under cold running water.
Scrub until the cartridge returns to its original white color, indicating that it’s clean and ready to use.
Ceramic filters can be cleaned multiple times before needing to be replaced. However, if your filter contains carbon media, it may degrade faster than the ceramic part. It’s crucial to replace the filter once it reaches its designated capacity to maintain effective filtration. For optimal performance, we recommend changing your ceramic dome water filter every 12 months.
FINAL THOUGHTS: CERAMIC DOME WATER FILTER
A ceramic dome water filter has a long history of being utilized as a filter medium in the water filtration industry. It’s due to its efficacy in eliminating bacteria, viruses, turbidity, protozoa, cysts, and other pollutants.
Awesome Water Filters offers premium quality ceramic dome water filters in Australia. Contact us for more information about this amazing method!
Sign up to get the latest on sales, new releases and more …